Enviro Rack ELV Fluid Removal System
A Faster, Cleaner Way to Process End-of-Life Vehicles
The Enviro Rack gives scrap yards, salvage yards, and automotive recyclers one heavy-duty workstation to remove, collect, and separate vehicle fluids quickly and efficiently.
Designed for real-world daily use, the Enviro Rack is 100% air powered and allows an operator to complete fluid removal in approximately 5–6 minutes while helping keep fluids contained, organized, and properly separated.
- Over 1,000 Enviro Racks In Service
- Trusted For More Than 20 Years
- 5–6 Minute Fluid Removal
- 100% Air Powered — No Electricity, Electric Motors, or Gasoline Engines Required at the Rack
- Designed to Support EPA and State-Level ELV Fluid-Removal Requirements
- Made In The USA
REQUEST PRICING AND INFORMATION
The Best Enviro Rack We’ve Ever Built
More than 20 years of real-world experience and over 1,000 Enviro Racks in service have gone into the system we manufacture today.
The current Enviro Rack combines the heavy-duty construction, simple 100% air-powered operation, fluid separation, portability, and secondary containment our customers have relied on for years with important improvements designed to help maintain fast, consistent fluid flow.
Every new Enviro Rack now includes a pneumatic air hammer with an Iron Ax beryllium-free non-sparking punch, plus two reusable stainless steel funnel liners. Operators can punch fuel tanks without creating drill shavings, or continue drilling fuel tanks or oil pans and use the liners to capture shavings and debris before they enter the fluid collection system.
This is the most refined Enviro Rack we have ever produced.
See the Enviro Rack in Operation
Watch the Enviro Rack remove, collect, and separate fluids from an end-of-life vehicle using its 100% air-powered system.
Built to Keep Shavings and Debris Out of the Fluid Collection System
Every new Enviro Rack includes equipment designed to help keep metal shavings and other debris out of the fluid collection system.
Punch the Tank
Every new Enviro Rack includes a pneumatic air hammer and an Iron Ax beryllium-free non-sparking punch. The punch allows the operator to quickly open the fuel tank without drilling and without creating drill shavings.
The punch also creates a large opening that allows gasoline to gravity-drain quickly into the collection funnel.
- Pneumatic air hammer and Iron Ax non-sparking punch included
- No drilling required when the punch is used
- No drill shavings created when punching
- Creates a large opening for fast gravity drainage
- Can be re-sharpened for extended service life
Prefer to Drill? We Have That Covered Too.
Some operators prefer to continue drilling fuel tanks or oil pans. Every new Enviro Rack includes two reusable stainless steel funnel liners designed for use in the red plastic fuel and oil funnels.
The formed stainless steel wire-mesh liners capture drill shavings, rust, tank scale, and other debris before it can enter the fluid collection system, while allowing the fluids to continue gravity-draining through the funnels.
- Two stainless steel funnel liners included
- Designed for the red plastic fuel and oil funnels
- Captures drill shavings from fuel tanks and oil pans
- Captures rust, tank scale, and other debris
- Reusable stainless steel wire-mesh construction
- Simply remove, clean, and reuse
Whether You Punch or Drill, Keep the Debris Out
Use the non-sparking punch on the fuel tank and drill shavings are not created. Prefer to drill the fuel tank or oil pan? The stainless steel funnel liners capture shavings and other debris before they enter the system.
The objective is simple: keep metal & plastic shavings and debris out of the fluid collection system and help maintain fast, consistent fluid flow.
Already Own an Enviro Rack?
Existing Enviro Rack owners can purchase the stainless steel funnel liners separately through IronAxParts.com.
Important: These liners are designed specifically for the red plastic Enviro Rack funnels and are not compatible with the metal funnels.
Purchase Enviro Rack Stainless Steel Funnel Liners
REQUEST PRICING AND INFORMATION
Built for Daily Scrap and Salvage Yard Operation
- 100% Air Powered. No electricity, electric motors, or gasoline engines are required at the rack.
- Heavy-Duty Construction. The Enviro Rack weighs approximately 7,500 pounds and is manufactured in the USA for the larger vehicles commonly processed in North American salvage yards.
- Large Operator Work Area. The work area gives operators room to position collection arms, remove fluids, and work around the vehicle efficiently.
- Portability. The Enviro Rack is forklift-ready and designed to be moved closer to the processing area when needed.
- Secondary Containment. Every Enviro Rack provides 609 gallons of secondary containment in addition to 720 gallons of onboard fluid-storage capacity.
- Low-Maintenance Operation. The air-powered design keeps the system simple and avoids electric or gasoline motors at the rack.
- Fast Processing. Complete fluid removal averages approximately 5–6 minutes. The rack can be operated by one or two people, and tires can also be removed while the vehicle is on the rack.
- Gasoline Separation. The operator can separate good gasoline from contaminated gasoline while remaining at the Enviro Rack.
- Antifreeze Separation. The operator can separate red antifreeze from green antifreeze while remaining at the Enviro Rack.
Pictured above is the optional heavy-duty roll-off container system.
Enviro Rack Standard Equipment
- Adjustable fluid-collection arms and funnels for positioning beneath vehicle fluid reservoirs.
- Pneumatic air drills for operators who prefer conventional drilling.
- Pneumatic air hammer with Iron Ax beryllium-free non-sparking punch for opening fuel tanks without creating drill shavings.
- Two reusable stainless steel funnel liners for the red plastic fuel and oil funnels to capture drill shavings, rust, tank scale, and other debris.
- Gasoline separation system for separating good gasoline from contaminated gasoline.
- Antifreeze separation system for separating red antifreeze from green antifreeze.
- 249-gallon catch pan.
- Four 180-gallon fluid-storage tanks.
- 360-gallon lower tank built into the floor beneath the catch pan.
- Tank gauges for monitoring fluid levels.
- Four fold-out catwalks for easier tire removal.
- Grated catwalk for operator footing and drainage.
- 25-foot retractable hose reel for an air wrench.
- Adjustable vehicle rack that can accommodate different vehicle sizes and can be positioned so the vehicle tilts left or right to help liquids drain to one side of the tank.
- The upper structure serves as an onboard air manifold and stores compressed air.
- Fire extinguisher.
- Fluid can be discharged from the tanks using air pressure.
- All tanks are equipped with lifting eyes for handling.
Dimensions:
Height: 7′ 4″
Length: 16′
Width: 6′ 6″
Weight: 7,500 pounds
Optional Add-Ons:
- Hook and rail system for moving the Enviro Rack with a roll-off container truck.
- Vacuum system to remove fluid from the master cylinder and power steering pump.
The Enviro Rack can be moved with a forklift and can be set on a concrete slab or directly on the ground. Concrete is not required.
Why Salvage Yards Choose the Enviro Rack
- More than 20 years of real-world ELV fluid-removal experience
- Over 1,000 systems in service
- Fast 5–6 minute fluid removal
- 100% air-powered operation
- Designed to help keep shavings and debris out of the fluid collection system
- Heavy-duty American construction with fluid separation and secondary containment
Frequently Asked Questions
Does the Enviro Rack require electricity?
No. The Enviro Rack is powered 100% by compressed air. No electric motors or gasoline engines are required for operation.
How does the Enviro Rack help keep shavings and debris out of the fluid collection system?
Every new Enviro Rack includes a pneumatic air hammer with an Iron Ax beryllium-free non-sparking punch, plus two reusable stainless steel funnel liners. The punch allows operators to open fuel tanks without drilling or creating drill shavings. Operators who prefer to drill fuel tanks or oil pans can use the liners to capture drill shavings and other debris before it enters the fluid collection system.
What size air compressor is required?
You do not need a large compressor to power the Enviro Rack. Each Enviro Rack is equipped with an onboard air manifold that stores compressed air inside the rack. A compressor capable of producing 100 PSI is sufficient.
Can gasoline and antifreeze be separated?
Yes. The gasoline separation system allows the operator to separate good gasoline from contaminated gasoline. The antifreeze separation system allows red antifreeze to be separated from green antifreeze.
How long does fluid removal take?
On average, complete fluid removal takes approximately 5–6 minutes.
How portable is the Enviro Rack?
The Enviro Rack is designed to be portable. A forklift can be used to move the rack to the area where end-of-life vehicles are being processed. An optional hook and rail system is also available for movement with a roll-off container truck.
Can the Enviro Rack be used outdoors?
Yes. The Enviro Rack can be used both indoors and outdoors.
Is financing available?
Yes. Financing options are available through our financing partners.
Ready to Improve Your ELV Fluid Removal Process?
For more than 20 years, scrap yards, salvage yards, and automotive recyclers have relied on the Enviro Rack to make vehicle fluid removal faster, cleaner, and easier to manage.
Today’s Enviro Rack is the best Enviro Rack we’ve ever built.
Contact Iron Ax today for pricing, financing information, and nationwide shipping.
☎ 478-252-0022
REQUEST PRICING AND INFORMATION
Manufactured in Georgia and shipped nationwide to salvage yards, scrap yards, automotive recyclers, and ELV processing facilities across the United States and Canada.